Have you ever wished you had just the right length of link bars for the vehicle you're working on? This kit makes it easy to set your own bar lengths without the hassle of drilling and tapping new threads!
We include four 32" long bars that can be cut to your desired length- then, simply weld the included threaded inserts into your cut end and you're all set!
Our link bars feature 1.25" tubing with a .120" wall, with a 3" wide bushing end TIG welded on one end. The threaded end has another 3" wide bushing with a 3/4-16 threaded stud TIG welded onto it, with a machined threaded insert and jam nut.
We include urethane bushings, grease fittings, zinc-plated inner sleeves, and 9/16" mounting hardware with nylon locking nuts.
Also included is a set of 16 mounting tabs so you can fine-tune the position of each end on your frame and axle. These tabs are laser-cut from .250" steel and feature precise bolt holes for slop-free operation.
- (4) 1.25” TIG WELDED LINK BARS, 32” LONG (WHICH CAN BE CUT DOWN)
- (4) 3/4-16 WELD-IN THREADED INSERTS
- (4) 3/4-16 ADJUSTABLE THREADED ROD ENDS (TIG WELDED)
- (4) 3/4-16 JAM NUTS
- (16) 1.5” URETHANE BUSHINGS
- (8) GREASE ZERK FITTINGS
- (8) BUSHING SLEEVES
- (16) 1/4" STEEL MOUNTING TABS
- (8) 9/16" Bolts
- (8) 9/16" Locknuts
- (16) 9/16" Washers
As with any universal part designed for custom suspension, we recommend installation to be performed by a professional! If you're tackling this yourself, please note that we include basic installation guides with this kit, but nothing for any specific vehicle application!
